CND Pink Tiara

1. P.R.E.P. the natural nail and apply a CND Clear Tip. Apply a thin base layer of Retention+ Clear Sculpting Powder and finish with the 180-grit side of the Hot Shot™ File.\n\nMix Retention+ Sculpting Powder and Additives in mixing jars to create the design’s colors. Cap jars and shake thoroughly to blend. To maintain the integrity of the enhancement never mix more than 30% Additives to any powder blend.\n Sheer Pink: 8 parts Clear, 1/8 part Additives Haute Pink\n Bright Pink: 6 parts Clear, 1/8 part Additives Haute Pink  

2. Apply a bead of Sheer Pink powder to Zones 2 and 3 to begin building the enhancement and creating the smile line.  

3. Create a small bead with the Bright Pink powder and place it in the center of Zone 1. Press the bead flat while using your brush to refine the edges of the circle. Create smaller dots along the smile line.  

4. “Ice” the extension edge with a bead of Bright Pink powder, wiping your brush dry to refine the edge as necessary.  

5. Use Retention+ Clear Sculpting Powder to encase Zone 1. Lightly smooth the enhancement with the 180-grit side of the Hot Shot File, without disturbing the design. Cleanse with ScrubFresh and then seal with Brisa Gloss. Cure for two minutes in the CND UV Lamp. Wipe with 99% Isopropyl Alcohol to remove top film.